Rebuilt Process Equipment

Schold used mixers, dispersers, mills and presses can be purchased in several
conditions to meet various budgets.

Completely Rebuilt

These machines are completely disassembled, sand blasted and reassembled using all new parts. (No used parts what so ever) The machines are painted OEM color and leave our facility looking, “brand new,” with a 6 month/ 1000 hour factory warranty, which ever comes first, hours or months. (This usually costs 75% of a new unit)

Refurbished

These machines are completely disassembled, cleaned and reassembled using as many existing parts as pass our Quality Control criteria. Where parts fail our tests, new parts are used. The machines are painted OEM color and leave our facility looking professional, with a 90 day factory warranty. (This usually costs between 60-70% of a new unit.)

Tuned Up and Run

These machines are completely inspected and run at maximum speed and comply with all factory Quality Control criteria. Only defective parts are replaced with new ones, but retains the used parts as long as they perform as run. The machines are painted OEM color and leave our facility ready for service with a 30 day factory warranty. (This usually costs between 40-50% of new unit.)

** IMPORTANT NOTICE **

All machines will be shipped as follows regardless of condition:

A. All units are painted OEM color
B. All will include contemporary safety devices, stickers and guards.
C. All units will comply to ASME B15, ANSI B.177.2, NAPIM, safety devices, guarding and criteria.
D. All lubricants will be flushed out and replaced.
E. All units will include an operation manual.
F. All units will be skidded for free but crated at an extra charge.
G. Refurbished and Tuned Up units can also be sand blasted at an extra charge.
H. Warranty period is based on (1) shift or (8) hours per day.

New Equipment

*NEW* Schold 30 Litre Horizontal Media Mill. Multi zone water cooled chamber, pressurized seals with cooled finned aluminum barrier fluid reservoir with low fluid sensor, pressure gage, temperature gage, ammeter and water flow meter.  Media cleaning area on mill frame with screen, media discharge tray for holding media after cleaning. Metallic and non-metallic axially adjustable agitator disks, adjustable elemented rotary screen for various viscosities, with carbide gap faces and (5) Push Button station. (1) Speed but can be inverter driven. 50hp Explosion Proof motor.

AVAILABLE USED EQUIPMENT
(Please contact factory for availability
and/or additional units )

(1) Schold Low Speed tank mounted box style belt drive, blender, (2) piece stainless steel shaft with coupling. Shaft length and Blade size to suit. 72 rpm. 15hp Explosion proof motor can be upgraded to 20hp. Beams or channel available or can be nozzle mounted.

(1) Schold Low Speed tank mounted box style belt drive, blender, (2) piece stainless steel shaft with coupling. Shaft length and blade diameter to suit. 163 rpm, 10hp Explosion Proof motor can be upgraded to 20hp. Beams or channels available or can be nozzle mounted.

(1) High Speed tank mounted box style belt drive, disperser. Carbon steel or stainless steel shaft with length to suit. Speeds to suit blade diameter, 10- 15-20- 25hp suitable. Beams or channels available or can be nozzle mounted.

(1) High Speed tank mounted box style belt drive, disperser, carbon steel or stainless steel shaft with length to suit. Speeds to suit blade diameter, 7 ½- 10- 15 – 20hp suitable. Beams or channels available or can be nozzle mounted.

(1) Schold 50hp Variable High Speed, heavy duty floor mounted disperser with tub holder. 650-3000 rpm Tapered Carbon Steel agitator shaft. 45” rise, 36” throat depth. Blade 5” off floor lowered, 50” raised. Explosion Proof motor. Can be upgraded to 60 hp.

(1) Schold 10hp Variable Low Speed High Torque, bow tie, floor mounted mixer. 88- 264 rpm. Air lock tub holder, carbon steel shaft, Explosion Proof motor, blade 7 ½” off floor, 52 ½” raised. Blade diameter to suit.

(1) Schold 25hp Variable High Speed, heavy duty floor mounted disperser with tub holder. 650 - 3000 rpm. Tapered carbon steel agitator shaft, blade 6 ½” off floor, 60 ½” raised. 54” rise, 37” throat depth. Blade diameter to suit. Explosion Proof motor.

(1) Schold F-600 Vertical Quick Clean Media Mill with 6” diameter grinding chamber, 4 ½ gallon volume. Pressurized seals, rotary filter screen with carbide gap faces. Hydraulic rise and pivoting water cooled chamber for quick color change. Variable speed. Compatible with metallic and non-metallic grinding media. 1100-2200 rpm. 20hp Explosion Proof motor.

(1) Schold 10” diameter – 15 Gallon Vertical water cooled Media Mill. Closed Chamber with inspection port, pressurized seals, rotary screen with carbide gap faces, barrier fluid reservoir with regulator and gage. Pressure gage, temperature gage, compatible with metallic and non-metallic grinding media. 30hp Explosion Proof motor.

(1) Schold “Inline,” Rotor Stator Double Chamber disperser, hardened wear liners, (2) styles of dispersion rotors, double water cooled chambers, mechanical pressurized seals, water cooled finned aluminum barrier fluid reservoir with low fluid sensor. Also has pressure gage, temperature gage, ammeter and water flow meter. Single speed but can be inverter driven. Horsepower depends on rotor style used and required tip speed. 30-50-100 hp capable.

(1) Schold Variable High Speed Box Style Tank Mounted disperser. Triple bearing design for added stability. Mechanical variable speed drive to produce 600-3600 rpm with a hand wheel control. Carbon Steel agitator shaft 84 ½” of shaft below the frame. 20hp Explosion Proof motor, blade size to suit. (Shaft can be modified to suit.)

(1) Schold Variable High Speed Box Style Tank Mounted disperser. Triple bearing design for added stability. Mechanical variable speed drive to produce 600-3600 rpm via hand wheel control. Carbon Steel agitator shaft 86 ¾ of shaft below the frame. 20hp Explosion Proof motor, blade size to suit. (Shaft can be modified to suit.)

(1) Schold 50 litre Horizontal Media Mill, stainless steel chamber with zoned cooling, elemented, high viscosity adjustable discharge area rotary screen with carbide gap separator. Hardened disks axially adjustable, water cooled, finned aluminum barrier fluid reservoir. (1) speed but can be inverter driven. (2) styles of agitator disks, Media wash out area on the frame with screen. Media discharge tray for dropping media, water flow meter, ammeter, low barrier fluid sensor, diaphragm pressure gages and temperature gage, 60hp, Explosion Proof motor can be 40 or 50hp.

(1) Schold 25hp Explosion Proof Variable High Speed heavy duty, floor mounted disperser with tub holder, 650- 3000 ppm, tapered Carbon Steel agitator shaft. Blade 7 ½” off floor, 49 ½” raised, 30” throat depth, 45” rise. Can be made to 30hp, Explosion Proof. Blade diameter to suit.

(1) 60hp and 40hp Dual Drive High Viscosity Twin Shaft disperser. Air over oil hydraulic rise. Dual Motors and Dual Reeves Mechanical Vari drives, operated by push button speed controls. Remote operators station with digital tachometers, ammeters, and speed controls. 304 Stainless steel, various high speed blade diameter and styles available. High Speed rpm 450-2200. Low Speed rpm 20-80. Low speed helix blade with dished profile. Other blade styles and diameters available. 59” from shaft bearing housings to floor. Low speed blade 13” from floor. Agitator shafts and blades can be modified to suit larger vessel.

(1) 50hp and 20hp Dual Drive High Viscosity Top Seal full vacuum rated, 304 Stainless steel Co-axial disperser. Square power up and power down column with electro hydraulic power pack. Dual Motors with Reeves mechanical drive for each blade. (2) ammeters, (2) digital tachometers. Explosion proof motors. Low speed blade to fit dished bottom tank with Teflon wall scrapers. 20 -80 rpm. High speed shaft to accommodate a high shear or Turbo Rotor Stator dispersion head. 550- 2500rpm. Complete with 3 drum capacity, 304 Stainless steel vacuum vessel with cooling /heating jacket or side shell. Dished lift off head with o-ring seal, sight port, lift off hatch, vacuum gage and bleed off valve. Dished bottom has bottom discharge with side access and a sub surface pigment/filler vacuum port. Liquid ring vacuum pump available.

(2) Large Schold Dual Drive Dual Motor 60hp and 30hp Bottom Seal Co-Axial dispersers. Air over oil hydraulic rise with 60” of stroke and air lock tub holder. Dual Reeves mechanical variable speed drives with lowered mechanical hand wheels, Carbon steel low speed blade with wall scrapers to suit a 60” diameter flat bottom vessel, 20-100 rpm, 7” off floor. High speed blade of various styles can be supplied up to 20” diameter, 400-2000 rpm TEFC motors.

  • Can be retrofitted with Turbo Rotor Stator dispersion head.
  • Can be retrofitted with push button speed controls.

(1) 20” diameter Turbo Rotor Stator head. 304 Stainless steel, complete but without mounting rods. Can be retrofitted to Single axis, Twin shaft or Co-Axial disperser. Horsepower range of 75hp and up.

(1) 10 ¾” diameter Turbo Rotor Stator head. 304 Stainless steel complete but without mounting rods. Can be retrofitted to Single axis, Twin shaft or Co-Axial dispersers. Horsepower range of 30hp and up.

(1) 8” diameter Turbo Rotor Stator head. 304 Stainless steel complete with mounting rods. Variable vent ring and variable bypass plate. Suitable for Single axis disperser retrofit. Horsepower range of 15- 50hp.

(1) 8” diameter Turbo Rotor Stator head, Carbon steel, complete with mounting rods. Variable vent ring and variable bypass plate. Suitable for Single axis disperser retrofit. Horsepower range is 15 – 50hp.


 

 
 
SOUTHERN SALES OFFICE
10383 Oak Street N.E., Ste 6
St. Petersburg, FL 33716
SALES, TECHNICAL & SAFETY HOTLINE
1-800-RGD-MIXR (743-6497)
727-576-2510 * Fax: 727-576-2503
HEADQUARTERS & MANUFACTURING
7201 West 64th Place
Chicago, IL  60638-4692
SALES, TECHNICAL & SAFETY HOTLINE
1-800-4MIXERS (464-9377)
708-458-3788 * Fax: 708-458-3866
   
 
     
 
Home | About Us | Standard Machines | Custom Machines | Used Equipment | Services | Contact Us | Blades |
Rotor Stators | Media Mills | Press-Outs | Interesting Photos